SW30/30H Silage Roller

• 

Silage roller SW 30H is used to increase the compaction performance of the compaction tractor with grass and maize silage. The welded rings ensure a very high point load and thus optimum penetration in the silo. The machines have twelve welded rings of a height of 160 mm and with a distance of 225 mm. Roller body and frame can be filled separately with water or other filling agents. Therefore, the ballast in the machines can be adjusted depending on application and towing vehicle capacity. The SW 30H model has a hydraulic displacement device. Thus, work can also be performed in corners and walls.

The roller body diameter is 950 mm. Welded rings with a collar height of 160 mm and a distance of 225 mm ensure uniform deep compaction of the silo bales without sticking to each other.

Option

• Silo edge seal (365 kg; requires 1 x dw) Recommended for silos without walls
• Hydraulic offset to both sides (600 mm on each side)
• Note: Usage is not possible if a silo edge seal is installed
• Drawbar (requires 1 x dw)
• Electronic counter of working hours (including installation). Reliable timing with vibration sensor
• Lighting together with warning signs
• Additional loads