“Fusion” baler-wrapper

With fixed baling chamber.

Type of baler-wrapper – semi-trailed, with a quick-acting one-step system for bale transfer from the chamber to the wrapping table and bale support by the lower walls of the chamber lower section to ensure stable operation on hilly terrain.

Technical characteristics:

1. Connection – tractors of drawbar type 3.0.

2. PTO shaft, rpm.

540

3. Input power distribution – equidirectional.

4. Hydraulic connections – 2 double-acting, free return.

5. Baling chamber parameters:

- type – fixed, 3-sectioned, with quick-acting one-step system for bale transfer from the chamber to the wrapping table;

 - number of shafts – 18; shaft ends are equipped with a seal system with reverse thread, which allows to automatically extract any material that gets caught behind the bearing;

- width, mm

- diameter, mm

- bearings – double-row with increased run-to-failure (at main load points);

- baling density, kg/m3

 

- performance, bales/hour

 

 

 

 

 

1230

1250

 

 hay 130-170 / straw 100-120 /

dried grass 400-475

60

6. Lubrication system:

- System type – progressive, automatic;

- lubrication direction – chains and bearing of main load points (chamber, rotor, pick-up);

- lubricant supply to load points – after each produced bale;

- lubricant supply to chains – constant,
with adjustable interval;

7. Pick-up parameters:

- type

- working width, mm

- width between tines, mm

- auxiliary units

- pickup completion, % no less than

 

cam, 5-bar

2000

70

Pressure roller

98

8. Feed rotor diameter, mm, no more than

800

9. Chopper parameters:

- number of knives, pcs.

- group activation, pcs.

- chopping length, mm

 

23

11/12/23

40/80

10. Film wrapping:

- System – vertical wrapping column; the wrapping algorithm allows to resume bale wrapping operation once one film roll breaks or runs out;

-  Film stretch, %

- Film dispensers, mm

- Film layers

 

 

 

70 standard (55 optional)

2 х 750

2 + 2 + 2

11. Wrapping material storage, pcs.

- net

- film

 

1+1

5+2

12. Baler operation – graphic control panel, from tractor cabin.

13. Control panel functions:

- automatic baling and film wrapping control with graphic depiction of current information with sound alarms;

- manual control of machine operation;

- bale formation mode control;

- film layer control;

- film layer overlap control;

- film breakage control;

- switching to single film roll wrapping;

- bale discharge mode control;

- knife group selection (11/12/23);

- diagnostics and calibration of machine units/elements;

- lubricant consumption control;

- work statistic records (up to 20 separate counters): bale counter; operating hour counter;

14. Auxiliary and safety systems:

- two-level cutting quality control system: 1st level – control and digital indication of knife pressure with open/close position alarms, 2nd level – control over distance between knife tips and rotor;

- bale density adjustment;

- dynamic rotor channel expansion system to prevent rotor clogging/jamming;

- hydraulic knife protection system against deformity/damage;

- rotor channel clog removal system.

15. Baler dimensions, mm:

- length

- width

- height

 

5800

2760

3020

16. Baler weight, kg, no more than

5700